46
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Effect of a Disintegration Mechanism on Wetting, Water Absorption, and Disintegration Time of Orodispersible Tablets

      other

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The aim of this study was to evaluate the influence of disintegration mechanism of various types of disintegrants on the absorption ratio (AR), wetting time (WT), and disintegration time (DT) of orodispersible tablets (ODTs). ODTs were prepared by direct compression using mannitol as filler and disintegrants selected from a range of swellable, osmotic, and porous disintegrants. Tablets formed were characterized for their water AR, WT, and DT. The porosity and mechanical strength of the tablets were also measured. Results show that the DT of formulated ODTs was directly related to the WT and was a function of the disintegration mechanism of the disintegrant used. The lowest WT and DT were observed for tablets formulated using the osmotic disintegrant sodium citrate and these tablets also showed the lowest AR and porosity. The wetting and disintegration of tablets containing the highly swellable disintegrant, sodium starch glycollate, was slowest despite their high water AR and high tablet porosity. Rapid wetting and disintegration of ODTs were therefore not necessarily related to the porosity of the tablets.

          Related collections

          Most cited references27

          • Record: found
          • Abstract: found
          • Article: not found

          Drug-delivery products and the Zydis fast-dissolving dosage form.

          H Seager (1998)
          Many patients find it difficult to swallow tablets and hard gelatin capsules and do not take their medication as prescribed. It is estimated that 50% of the population is affected by this problem which results in a high incidence of non-compliance and ineffective therapy. The difficulty is experienced in particular by paediatric and geriatric patients, but it also applies to people who are ill in bed and to those active working patients who are busy or travelling, especially those who have no access to water. Such problems can be resolved by means of the Zydis dosage form which does not require water to aid swallowing. The Zydis fast-dissolving dosage form is a unique freeze dried medicinal tablet, made from well known and acceptable materials. When Zydis units are put into the mouth, the freeze dried structure disintegrates instantaneously releasing the drug which dissolves or disperses in the saliva. The saliva containing the dissolved or dispersed medicament is then swallowed and the drug is absorbed in the normal way. Some drugs are absorbed from the mouth, pharynx and oesophagus as the saliva passes down into the stomach. In these cases, the bioavailabilities of drugs from Zydis formulations are significantly greater than those observed from standard dosage forms. This paper deals with the formulation and process technology of the Zydis dosage form. The bioavailability characteristics of Zydis products are summarized, and in particular, the design of Zydis products for the enhancement of oral bioavailability and the improvement of clinical activity, through transmucosal delivery and pregastric absorption, is discussed.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Preparation and evaluation of a compressed tablet rapidly disintegrating in the oral cavity.

            In order to make a compressed tablet which can rapidly disintegrate in the oral cavity, microcrystalline cellulose and low-substituted hydroxypropylcellulose were used as disintegrants, and ethenzamide and ascorbic acid were chosen as poorly and easily water soluble model drugs, respectively. The mixture of microcrystalline cellulose and low-substituted hydroxypropylcellulose was compressed at 100--500 kgf in the absence of an active ingredient. The properties of these tablets, such as hardness, porosity, the time required for complete wetting of a tested tablet (wetting time), water uptake and disintegration time determined by a new disintegration apparatus, were investigated to elucidate the wetting and disintegration characteristics of these tablets, When the MCC/L-HPC ratio was in the range of 8:2 to 9:1, the shortest disintegration time was observed. The disintegration of tablets containing ethenzamide or ascorbic acid was examined next. Tablet disintegration time in the oral cavity was also tested, and good correlation between the disintegration behaviors in vitro and in the oral cavity was recognized.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Evaluation of rapidly disintegrating tablets prepared by a direct compression method.

              To make rapidly disintegrating tablets with sufficient mechanical integrity as well as a pleasant taste, microcrystalline cellulose (MCC), Tablettose (TT), and crosslinked sodium carboxymethyl cellulose (Ac-di-sol) or erythritol (ET) were formulated. Tablets were made by a direct compression method (I). Tablet properties such as porosity, tensile strength, and disintegration time were determined. The tensile strength and disintegration time were selected as response variables, tablet porosity and parameters representing the characteristics of formulation were selected as controlling factors, and their relation was determined by the polynomial regression method. Response surface plots and contour plots of tablet tensile strength and disintegration time were also constructed. The optimum combination of tablet porosity and formulation was obtained by superimposing the contour diagrams of tablet tensile strength and disintegration time. Rapidly disintegrating tablets with durable structure and desirable taste could be prepared within the obtained optimum region.
                Bookmark

                Author and article information

                Journal
                J Young Pharm
                J Young Pharm
                JYPharm
                Journal of Young Pharmacists : JYP
                Medknow Publications & Media Pvt Ltd (India )
                0975-1483
                0975-1505
                Jul-Sep 2012
                : 4
                : 3
                : 157-163
                Affiliations
                [1] School of Pharmacy, Royal College of Surgeons in Ireland, 123, St. Stephens Green, Dublin 2, Ireland
                Author notes
                Address for correspondence: Dr. Zebunnissa Ramtoola, E-mail: zramtoola@ 123456rcsi.ie
                Article
                JYPharm-4-157
                10.4103/0975-1483.100021
                3483525
                23112534
                1f841346-6d20-4410-9cac-532570e41cad
                Copyright: © Journal of Young Pharmacists

                This is an open-access article distributed under the terms of the Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

                History
                Categories
                Pharmaceutics

                Pharmacology & Pharmaceutical medicine
                porosity,disintegration time,absorption ratio,orodispersible tablets,wetting time

                Comments

                Comment on this article