5
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Multi-Walled Carbon Nanotubes for Magnetic Solid-Phase Extraction of Six Heterocyclic Pesticides in Environmental Water Samples Followed by HPLC-DAD Determination

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Magnetic multi-walled carbon nanotubes were prepared as magnetic solid-phase extraction (MSPE) adsorbent for the enrichment of six heterocyclic pesticides in environmental water samples, including imidacloprid, triadimefon, fipronil, flusilazole, chlorfenapyr and fenpyroximate. Then six heterocyclic pesticides were separated and determined by high-performance liquid chromatography-diode-array detector (HPLC-DAD). Major factors influencing MSPE efficiency, including the dose of mag-multi-walled carbon nanotubes (mag-MWCNTs), extraction time, solution pH, salt concentration, type and volume of eluent and desorption time were investigated. Under the optimized conditions, the enrichment factor of the method reached to 250. The linearity was achieved within 0.05–10.0 μg/L for imidacloprid and chlorfenapyr, 0.10–10.0 μg/L for fipronil, flusilazole, triadimefon and fenpyroximate. Limits of detection were in the range of 0.01–0.03 μg/L. Good precision at three spiked levels were 1.1–11.2% (intra-day) and 1.7–11.0% (inter-day) with relative standard deviation of peak area, respectively. The developed method was utilized to analyze tap water, river water and reservoir water samples and recoveries at three spiked concentration levels ranged from 72.2% to 107.5%. The method was proved to be a convenient, rapid and practical method for sensitive determination of heterocyclic pesticides.

          Related collections

          Most cited references38

          • Record: found
          • Abstract: found
          • Article: not found

          Lightweight, compressible and electrically conductive polyurethane sponges coated with synergistic multiwalled carbon nanotubes and graphene for piezoresistive sensors

          Lightweight, compressible and electrically conductive MWCNT/RGO@PU sponges fabricated by the LBL electrostatic assembly for piezoresistive sensors. Lightweight, compressible and highly sensitive pressure/strain sensing materials are highly desirable for the development of health monitoring, wearable devices and artificial intelligence. Herein, a very simple, low-cost and solution-based approach is presented to fabricate versatile piezoresistive sensors based on conductive polyurethane (PU) sponges coated with synergistic multiwalled carbon nanotubes (MWCNTs) and graphene. These sensor materials are fabricated by convenient dip-coating layer-by-layer (LBL) electrostatic assembly followed by in situ reduction without using any complicated microfabrication processes. The resultant conductive MWCNT/RGO@PU sponges exhibit very low densities (0.027–0.064 g cm −3 ), outstanding compressibility (up to 75%) and high electrical conductivity benefiting from the porous PU sponges and synergistic conductive MWCNT/RGO structures. In addition, the MWCNT/RGO@PU sponges present larger relative resistance changes and superior sensing performances under external applied pressures (0–5.6 kPa) and a wide range of strains (0–75%) compared with the RGO@PU and MWCNT@PU sponges, due to the synergistic effect of multiple mechanisms: “disconnect–connect” transition of nanogaps, microcracks and fractured skeletons at low compression strain and compressive contact of the conductive skeletons at high compression strain. The electrical and piezoresistive properties of MWCNT/RGO@PU sponges are strongly associated with the dip-coating cycle, suspension concentration, and the applied pressure and strain. Fully functional applications of MWCNT/RGO@PU sponge-based piezoresistive sensors in lighting LED lamps and detecting human body movements are demonstrated, indicating their excellent potential for emerging applications such as health monitoring, wearable devices and artificial intelligence.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Magnetic solid-phase extraction

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Human-toxicological effect and damage factors of carcinogenic and noncarcinogenic chemicals for life cycle impact assessment.

              Chemical fate, effect, and damage should be accounted for in the analysis of human health impacts by toxic chemicals in life-cycle assessment (LCA). The goal of this article is to present a new method to derive human damage and effect factors of toxic pollutants, starting from a lognormal dose-response function. Human damage factors are expressed as disability-adjusted life years (DALYs). Human effect factors contain a disease-specific and a substance-specific component. The disease-specific component depends on the probability of disease occurrence and the distribution of sensitivities in the human population. The substance-specific component, equal to the inverse of the ED50, represents the toxic potency of a substance. The new method has been applied to calculate combined human damage and effect factors for 1,192 substances. The total range of 7 to 9 orders of magnitude between the substances is dominated by the range in toxic potencies. For the combined factors, the typical uncertainty, represented by the square root of the ratio of the 97.5th and 2.5th percentile, is a factor of 25 for carcinogenic effects and a factor of 125 for noncarcinogenic effects. The interspecies conversion factor, the (non)cancer effect conversion factor, and the average noncancer damage factor dominate the overall uncertainty.
                Bookmark

                Author and article information

                Journal
                Materials (Basel)
                Materials (Basel)
                materials
                Materials
                MDPI
                1996-1944
                15 December 2020
                December 2020
                : 13
                : 24
                : 5729
                Affiliations
                [1 ]School of Environmental & Municipal Engineering, Qingdao University of Technology, Qingdao 266033, China; hlw1120@ 123456163.com (L.H.); 18354215495@ 123456163.com (G.W.)
                [2 ]Key Laboratory of Coastal Environmental Processes and Ecological Remediation, Research Centre for Coastal Environmental Engineering and Technology, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai 264003, China; lywang@ 123456yic.ac.cn (L.W.); wangxy@ 123456yic.ac.cn (X.W.)
                [3 ]School of Pharmacy, Binzhou Medical University, Yantai 264003, China
                Author notes
                Author information
                https://orcid.org/0000-0002-3388-5920
                https://orcid.org/0000-0002-3764-3515
                Article
                materials-13-05729
                10.3390/ma13245729
                7765549
                33334066
                278325e5-b9e5-4c65-8928-3bf62215bf71
                © 2020 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 28 August 2020
                : 13 December 2020
                Categories
                Article

                mag-multi-walled carbon nanotubes (mag-mwcnts),magnetic solid-phase extraction (mspe),heterocyclic pesticides,water samples

                Comments

                Comment on this article