14
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Biomodification of a Class-V Restorative Material by Incorporation of Bioactive Agents

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Restoring subgingival class-V cavities successfully, demand special biological properties from a restorative material. This study aimed to assess the effects of incorporating bioactive materials to glass ionomer cement (GIC) on its mechanical and biological properties. Hydroxyapatite, chitosan, chondroitin sulphate, bioglass, gelatine and processed bovine dentin were incorporated into a GIC restorative material. Compressive strength, biaxial flexural strength (BFS), hardness, setting and working time measurements were investigated. Biocompatibility of the new materials was assessed using both monolayer cell cultures of normal oral fibroblasts (NOF) and TR146 keratinocytes, and a 3D-tissue engineered human oral mucosa model (3D-OMM) using presto-blue tissue viability assay and histological examination. Significant reduction in the compressive strength and BFS of gelatine-modified discs was observed, while chondroitin sulphate-modified discs had reduced BFS only ( p value > 0.05). For hardness, working and setting times, only bioglass caused significant increase in the working time. NOF viability was significantly increased when exposed to GIC-modified with bovine dentine, bioglass and chitosan. Histological examination showed curling and growth of the epithelial layer toward the disc space, except for the GIC modified with gelatine. This study has highlighted the potential for clinical application of the modified GICs with hydroxyapatite, chitosan, bioglass and bovine dentine in subgingival class-V restorations.

          Related collections

          Most cited references34

          • Record: found
          • Abstract: found
          • Article: not found

          Mechanical properties and microstructures of glass-ionomer cements.

          The objective of this study was to determine the flexural strength (FS), compressive strength (CS), diametral tensile strength (DTS), Knoop hardness (KHN) and wear resistance of ten commercial glass-ionomer cements (GICs). The fracture surfaces of these cements were examined using scanning electron microscopic (SEM) techniques to ascertain relationships between the mechanical properties and microstructures of these cements. Specimens were fabricated according to the instructions from each manufacturer. The FS, CS, DTS, KHN and wear rate were measured after conditioning the specimens for 7 d in distilled water at 37 degrees C. One-way analysis of variance with the post hoc Tukey-Kramer multiple range test was used to determine which specimen groups were significantly different for each test. The fracture surface of one representative specimen of each GIC from the FS tests was examined using a scanning electron microscope. The resin-modified GICs (RM GICs) exhibited much higher FS and DTS, not generally higher CS, often lower Knoop hardness and generally lower wear resistance, compared to the conventional GICs (C GICs). Vitremer (3M) had the highest values of FS and DTS; Fuji II LC (GC International) and Ketac-Molar (ESPE) had the highest CS; Ketac-Fil (ESPE) had the highest KHN. Ketac-Bond (ESPE) had the lowest FS; alpha-Silver (DMG-Hamburg) had the lowest CS. Four GICs (alpha-Fil (DMG-Hamburg), alpha-Silver, Ketac-Bond and Fuji II) had the lowest values of DTS, which were not significantly different from each other; alpha-Silver and Ketac-Silver had the lowest values of KHN. The highest wear resistance was exhibited by alpha-Silver and Ketac-Fil; F2LC had the lowest wear resistance. The C GICs exhibited brittle behavior, whereas the RM GICs underwent substantial plastic deformation in compression. The more integrated the microstructure, the higher were the FS and DTS. Higher CS was correlated with smaller glass particles, and higher KHN was found where there was a combination of smaller glass particles and lower porosity. Larger glass particle sizes and a more integrated microstructure contributed to a higher wear resistance. The mechanical properties of GICs were closely related to their microstructures. Factors such as the integrity of the interface between the glass particles and the polymer matrix, the particle size, and the number and size of voids have important roles in determining the mechanical properties.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Wound tissue can utilize a polymeric template to synthesize a functional extension of skin.

            Prompt and long-term closure of full-thickness skin wounds is guinea pigs and humans is achieved by applying a bilayer polymeric membrane. The membrane comprises a top layer of a silicone elastomer and a bottom layer of a porous cross-linked network of collagen and glycosaminoglycan. The bottom layer can be seeded with a small number of autologous basal cells before grafting. No immunosuppression is used and infection, exudation, and rejection are absent. Host tissue utilizes the sterile membrane as a culture medium to synthesize neoepidermal and neodermal tissue. A functional extension of skin over the entire wound area is formed in about 4 weeks.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Study on gelatin-containing artificial skin: I. Preparation and characteristics of novel gelatin-alginate sponge.

              An absorbable sponge, composed of gelatin and alginate, was prepared by new crosslinking method that improved the efficiency of crosslinking. The crosslinking degree was characterized by trinitrobenzenesulfonic acid (TNBS) assay. A water uptake ability test, in vitro drug release and collagenase degradation tests, and an in vivo animal test were employed to confirm the applicability of this gelatin-alginate sponge as a wound dressing material. As the alginate content in the sponge increased, the porosity increased, resulting in an enhanced water uptake ability. Sponges loaded with silver sulfadiazine or gentamicin sulfate slowly released drugs for up to four days. The crosslinked sponge resisted in vitro collagenase digestion for up to three days. An in vivo animal test using witar rat showed rather good wound healing effect of gelatin-alginate sponge containing AgSD than vaseline gauze in our full-thickness skin defect model.
                Bookmark

                Author and article information

                Journal
                Dent J (Basel)
                Dent J (Basel)
                dentistry
                Dentistry Journal
                MDPI
                2304-6767
                29 November 2019
                December 2019
                : 7
                : 4
                : 110
                Affiliations
                [1 ]School of Clinical Dentistry, University of Sheffield, Sheffield S10 2TA, UK; tmbinaljadm1@ 123456sheffield.ac.uk (T.B.); r.moorehead@ 123456sheffield.ac.uk (R.M.); tkdalmela@ 123456gmail.com (T.A.); K.L.Franklin@ 123456sheffield.ac.uk (K.F.)
                [2 ]School of Dentistry, Taibah University, Medina 42353, Saudi Arabia
                [3 ]College of Dentistry, University of Mosul, Mosul 41002, Iraq
                [4 ]School of Dentistry, Marquette University, Milwaukee, WI 53233, USA; lobat.tayebi@ 123456marquette.edu
                Author notes
                [* ]Correspondence: k.moharamzadeh@ 123456sheffield.ac.uk ; Tel.: +44-114-215-9328; Fax: +44-114-2665326
                Author information
                https://orcid.org/0000-0001-6608-9384
                https://orcid.org/0000-0002-8842-4638
                Article
                dentistry-07-00110
                10.3390/dj7040110
                6960733
                31795421
                2b4e00db-f5c5-4dce-9b43-f4fe22df90ac
                © 2019 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 01 November 2019
                : 27 November 2019
                Categories
                Article

                dental materials,glass ionomer cement,biocompatibility,oral mucosa,biomodification

                Comments

                Comment on this article