Microbial Fuel Cell United with Other Existing Technologies for Enhanced Power Generation and Efficient Wastewater Treatment

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

Nowadays, the world is experiencing an energy crisis due to extensive globalization and industrialization. Most of the sources of renewable energy are getting depleted, and thus, there is an urge to locate alternative routes to produce energy efficiently. Microbial fuel cell (MFC) is a favorable technology that utilizes electroactive microorganisms acting as a biocatalyst at the anode compartment converting organic matter present in sewage water for bioelectricity production and simultaneously treating wastewater. However, there are certain limitations with a typical stand-alone MFC for efficient energy recovery and its practical implementation, including low power output and high cost associated with treatment. There are various modifications carried out on MFC for eliminating the limitations of a stand-alone MFC. Examples of such modification include integration of microbial fuel cell with capacitive deionization technology, forward osmosis technology, anaerobic digester, and constructed wetland technology. This review describes various integrated MFC systems along with their potential application on an industrial scale for wastewater treatment, biofuel generation, and energy production. As a result, such integration of MFCs with existing systems is urgently needed to address the cost, fouling, durability, and sustainability-related issues of MFCs while also improving the grade of treatment received by effluent.

Related collections

Most cited references 106

Record: found
Abstract: found
Article: not found

Microbial fuel cells: methodology and technology.

Bruce Logan, Bert Hamelers, René Rozendal … (2006)

Microbial fuel cell (MFC) research is a rapidly evolving field that lacks established terminology and methods for the analysis of system performance. This makes it difficult for researchers to compare devices on an equivalent basis. The construction and analysis of MFCs requires knowledge of different scientific and engineering fields, ranging from microbiology and electrochemistry to materials and environmental engineering. Describing MFC systems therefore involves an understanding of these different scientific and engineering principles. In this paper, we provide a review of the different materials and methods used to construct MFCs, techniques used to analyze system performance, and recommendations on what information to include in MFC studies and the most useful ways to present results.

0 comments Cited 476 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Direct biological conversion of electrical current into methane by electromethanogenesis.

Shaoan Cheng, Defeng Xing, Douglas F. Call … (2009)

New sustainable methods are needed to produce renewable energy carriers that can be stored and used for transportation, heating, or chemical production. Here we demonstrate that methane can directly be produced using a biocathode containing methanogens in electrochemical systems (abiotic anode) or microbial electrolysis cells (MECs; biotic anode) by a process called electromethanogenesis. At a set potential of less than -0.7 V (vs Ag/AgCl), carbon dioxide was reduced to methane using a two-chamber electrochemical reactor containing an abiotic anode, a biocathode, and no precious metal catalysts. At -1.0 V, the current capture efficiency was 96%. Electrochemical measurements made using linear sweep voltammetry showed that the biocathode substantially increased current densities compared to a plain carbon cathode where only small amounts of hydrogen gas could be produced. Both increased current densities and very small hydrogen production rates by a plain cathode therefore support a mechanism of methane production directly from current and not from hydrogen gas. The biocathode was dominated by a single Archaeon, Methanobacterium palustre. When a current was generated by an exoelectrogenic biofilm on the anode growing on acetate in a single-chamber MEC, methane was produced at an overall energy efficiency of 80% (electrical energy and substrate heat of combustion). These results show that electromethanogenesis can be used to convert electrical current produced from renewable energy sources (such as wind, solar, or biomass) into a biofuel (methane) as well as serving as a method for the capture of carbon dioxide.

0 comments Cited 225 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane.

Hong. Liu, Bruce Logan (2004)

Microbial fuel cells (MFCs) are typically designed as a two-chamber system with the bacteria in the anode chamber separated from the cathode chamber by a polymeric proton exchange membrane (PEM). Most MFCs use aqueous cathodes where water is bubbled with air to provide dissolved oxygen to electrode. To increase energy output and reduce the cost of MFCs, we examined power generation in an air-cathode MFC containing carbon electrodes in the presence and absence of a polymeric proton exchange membrane (PEM). Bacteria present in domestic wastewater were used as the biocatalyst, and glucose and wastewater were tested as substrates. Power density was found to be much greater than typically reported for aqueous-cathode MFCs, reaching a maximum of 262 +/- 10 mW/m2 (6.6 +/- 0.3 mW/L; liquid volume) using glucose. Removing the PEM increased the maximum power density to 494 +/- 21 mW/m2 (12.5 +/- 0.5 mW/L). Coulombic efficiency was 40-55% with the PEM and 9-12% with the PEM removed, indicating substantial oxygen diffusion into the anode chamber in the absence of the PEM. Power output increased with glucose concentration according to saturation-type kinetics, with a half saturation constant of 79 mg/L with the PEM-MFC and 103 mg/L in the MFC without a PEM (1000 omega resistor). Similar results on the effect of the PEM on power density were found using wastewater, where 28 +/- 3 mW/m2 (0.7 +/- 0.1 mW/L) (28% Coulombic efficiency) was produced with the PEM, and 146 +/- 8 mW/m2 (3.7 +/- 0.2 mW/L) (20% Coulombic efficiency) was produced when the PEM was removed. The increase in power output when a PEM was removed was attributed to a higher cathode potential as shown by an increase in the open circuit potential. An analysis based on available anode surface area and maximum bacterial growth rates suggests that mediatorless MFCs may have an upper order-of-magnitude limit in power density of 10(3) mW/m2. A cost-effective approach to achieving power densities in this range will likely require systems that do not contain a polymeric PEM in the MFC and systems based on direct oxygen transfer to a carbon cathode.