Inviting an author to review:
Find an author and click ‘Invite to review selected article’ near their name.
Search for authorsSearch for similar articles
20
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Antibacterial activity of a modified unfilled resin containing a novel polymerizable quaternary ammonium salt MAE-HB

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Resins with strong and long-lasting antibacterial properties are critical for the prevention of secondary dental caries. In this study, we evaluated the antibacterial effect and the underlying mechanism of action of an unfilled resin incorporating 2-methacryloxylethyl hexadecyl methyl ammonium bromide (MAE-HB) against Streptococcus mutans UA159 ( S. mutans UA159). MAE-HB was added into unfilled resin at 10 mass%, and unfilled resin without MAE-HB served as the control. Bacterial growth was inhibited on 10%-MAE-HB unfilled resin compared with the control at 1 d, 7 d, 30 d, or 180 d (P < 0.05). The growth inhibitory effect was independent of the incubation time (P > 0.05). No significant differences in the antibacterial activities of eluents from control versus 10%-MAE-HB unfilled resins were observed at any time point (P > 0.05). The number of bacteria attached to 10%-MAE-HB unfilled resin was considerably lower than that to control. Fe-SEM and CLSM showed that 10%-MAE-HB unfilled resin disturbed the integrity of bacterial cells. Expression of the bacterial glucosyltransferases, gtfB and gtfC, was lower on 10%-MAE-HB unfilled resin compared to that on control (P < 0.05). These data indicate that incorporation of MAE-HB confers unfilled resin with strong and long-lasting antibacterial effects against S. mutans.

          Related collections

          Most cited references40

          • Record: found
          • Abstract: found
          • Article: not found

          Review on fluoride-releasing restorative materials--fluoride release and uptake characteristics, antibacterial activity and influence on caries formation.

          The purpose of this article was to review the fluoride release and recharge capabilities, and antibacterial properties, of fluoride-releasing dental restoratives, and discuss the current status concerning the prevention or inhibition of caries development and progression. Information from original scientific full papers or reviews listed in PubMed (search term: fluoride release AND (restorative OR glass-ionomer OR compomer OR polyacid-modified composite resin OR composite OR amalgam)), published from 1980 to 2004, was included in the review. Papers dealing with endodontic or orthodontic topics were not taken into consideration. Clinical studies concerning secondary caries development were only included when performed in split-mouth design with an observation period of at least three years. Fluoride-containing dental materials show clear differences in the fluoride release and uptake characteristics. Short- and long-term fluoride releases from restoratives are related to their matrices, setting mechanisms and fluoride content and depend on several environmental conditions. Fluoride-releasing materials may act as a fluoride reservoir and may increase the fluoride level in saliva, plaque and dental hard tissues. However, clinical studies exhibited conflicting data as to whether or not these materials significantly prevent or inhibit secondary caries and affect the growth of caries-associated bacteria compared to non-fluoridated restoratives. Fluoride release and uptake characteristics depend on the matrices, fillers and fluoride content as well as on the setting mechanisms and environmental conditions of the restoratives. Fluoride-releasing materials, predominantly glass-ionomers and compomers, did show cariostatic properties and may affect bacterial metabolism under simulated cariogenic conditions in vitro. However, it is not proven by prospective clinical studies whether the incidence of secondary caries can be significantly reduced by the fluoride release of restorative materials.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            The exopolysaccharide matrix: a virulence determinant of cariogenic biofilm.

            Many infectious diseases in humans are caused or exacerbated by biofilms. Dental caries is a prime example of a biofilm-dependent disease, resulting from interactions of microorganisms, host factors, and diet (sugars), which modulate the dynamic formation of biofilms on tooth surfaces. All biofilms have a microbial-derived extracellular matrix as an essential constituent. The exopolysaccharides formed through interactions between sucrose- (and starch-) and Streptococcus mutans-derived exoenzymes present in the pellicle and on microbial surfaces (including non-mutans) provide binding sites for cariogenic and other organisms. The polymers formed in situ enmesh the microorganisms while forming a matrix facilitating the assembly of three-dimensional (3D) multicellular structures that encompass a series of microenvironments and are firmly attached to teeth. The metabolic activity of microbes embedded in this exopolysaccharide-rich and diffusion-limiting matrix leads to acidification of the milieu and, eventually, acid-dissolution of enamel. Here, we discuss recent advances concerning spatio-temporal development of the exopolysaccharide matrix and its essential role in the pathogenesis of dental caries. We focus on how the matrix serves as a 3D scaffold for biofilm assembly while creating spatial heterogeneities and low-pH microenvironments/niches. Further understanding on how the matrix modulates microbial activity and virulence expression could lead to new approaches to control cariogenic biofilms.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans.

              The antibacterial activity of quaternary ammonium polyethylenimine (PEI) nanoparticles embedded at 1%w/w with clinically used bonding, flowable and hybrid dental composite resins and cured by light polymerization was studied. The antibacterial activity was tested with Streptoccocus mutans by: (i) the agar diffusion test (ADT); (ii) the direct contact test; (iii) bacterial growth in the materials elute; (iv) and scanning electron microscope (SEM). Using the direct contact test, antibacterial activity (p<0.001) was found in all three types of composite resins incorporated with the synthesized nanoparticles. The effect lasted for at least 1 month. SEM demonstrated bacterial debris and no streptococcal chains at 24h of bacterial contact. The addition of 1%w/w of nanoparticles did not affect the flexural modulus and the flexural strength of the dental composite materials. The results indicate that quaternary ammonium PEI nanoparticles immobilized in resin-based materials have a strong antibacterial activity upon contact without leach-out of the nanoparticles and without compromise in mechanical properties.
                Bookmark

                Author and article information

                Journal
                Sci Rep
                Sci Rep
                Scientific Reports
                Nature Publishing Group
                2045-2322
                23 September 2016
                2016
                : 6
                : 33858
                Affiliations
                [1 ]State Key Laboratory of Military Stomatology & National Clinical Research Centre for Oral Diseases & Shaanxi International Joint Research Center for Oral Diseases, Department of General Dentistry and Emergency, School of Stomatology, Fourth Military Medical University , Xi’an, Shaanxi, 710032, P. R. China
                [2 ]State Key Laboratory of Military Stomatology & National Clinical Research Centre for Oral Diseases & Shaanxi key Laboratory of Stomatology, Department of Prosthodontics, School of Stomatology, Fourth Military Medical University , Xi’an, 710032, P. R. China
                [3 ]State Key Laboratory of Military Stomatology & National Clinical Research Centre for Oral Diseases & Shaanxi Engineering Research Center for Dental Materials and Advanced Manufacture, Department of VIP Dental Care, School of Stomatology, Fourth Military Medical University , Xi’an, 710032, P. R. China
                [4 ]Department of Stomatology, Kunming General Hospital of PLA , Kunming, 650032, P. R. China
                [5 ]School of Chemical Engineering, Nanjing University of Science and Technology , Nanjing, 210094, P. R. China
                Author notes
                [*]

                These authors contributed equally to this work.

                Article
                srep33858
                10.1038/srep33858
                5034341
                27659279
                4f9935fa-f123-4a23-aa85-26e028f8a58b
                Copyright © 2016, The Author(s)

                This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

                History
                : 12 May 2016
                : 04 September 2016
                Categories
                Article

                Uncategorized
                Uncategorized

                Comments

                Comment on this article