1
views
0
recommends
+1 Recommend
1 collections
    0
    shares

      To submit to Bentham Journals, please click here

      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Performance of Bioceramic-based Root Filling Material with Artifact Reduction Properties in the Detection of Vertical Root Fractures Using Cone-beam Computed Tomography

      , , ,
      The Open Dentistry Journal
      Bentham Science Publishers Ltd.

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Introduction:

          In Cone-beam Computed Tomography (CBCT) images, metallic artifacts by root filling materials reduce the quality of images. It seems that bioceramic sealers produce fewer artifacts than gutta-percha. In this situation, the possibility of VRF detection could increase, and therefore, flap and exploratory surgery would not be needed. The purpose of this study was to evaluate the performance of a bioceramic-based root filling material in the detection of Vertical Root Fractures (VRF) in CBCT imaging.

          Materials and Methods:

          This study was conducted at the dental school from March to August 2019, and 100 healthy human mandibular premolar teeth were obtained and randomly divided into two equal groups. The teeth were filled with either AH26 and gutta-percha or bioceramic root filling materials. VRF was induced on half of the decoronated teeth in each group using a Global Testing Machine, and the others were considered control. CBCT imaging was performed by the Cranex 3D machine. Comparisons of the 2 groups were made using the Mann-Whitney test.

          Results:

          There was a significant difference between the two groups of bioceramic and gutta-percha in the measured indices, including sensitivity (P=0.017), specificity (P=0.018), positive predictive value (P=0.018), negative predictive value (P=0.018), and accuracy (P=0.011). The Area Under Curve (AUC) also showed a significant difference between the two groups (P=0.011). According to Kappa test results, no significant difference was obtained between the findings of the two observers.

          Conclusion:

          Different root filling materials showed a different extent of artifact in CBCT images. Bioceramic root filling material induces fewer artifacts in CBCT images, and the diagnostic value of VRF in CBCT images in the root canals filled with it is greater than those filled with AH26 and gutta-percha.

          Related collections

          Most cited references31

          • Record: found
          • Abstract: found
          • Article: not found

          What is cone-beam CT and how does it work?

          This article on x-ray cone-beam CT (CBCT) acquisition provides an overview of the fundamental principles of operation of this technology and the influence of geometric and software parameters on image quality and patient radiation dose. Advantages of the CBCT system and a summary of the uses and limitations of the images produced are discussed. All current generations of CBCT systems provide useful diagnostic images. Future enhancements most likely will be directed toward reducing scan time; providing multimodal imaging; improving image fidelity, including soft tissue contrast; and incorporating task-specific protocols to minimize patient dose.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Artefacts in CBCT: a review.

            Artefacts are common in today's cone beam CT (CBCT). They are induced by discrepancies between the mathematical modelling and the actual physical imaging process. Since artefacts may interfere with the diagnostic process performed on CBCT data sets, every user should be aware of their presence. This article aims to discuss the most prominent artefacts identified in the scientific literature and review the existing knowledge on these artefacts. We also briefly review the basic three-dimensional (3D) reconstruction concept applied by today's CBCT scanners, as all artefacts are more or less directly related to it.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Calcium silicate bioactive cements: Biological perspectives and clinical applications.

              To introduce and to examine the research progress and the investigation on hydraulic calcium silicate cements (HCSCs), well-known as MTA (mineral trioxide aggregate). This review paper introduces the most important investigations of the last 20 years and analyze their impact on HCSCs use in clinical application. HCSCs were developed more than 20 years ago. Their composition is largely based on Portland cement components (di- and tri-calcium silicate, Al- and Fe-silicate). They have important properties such as the ability to set and to seal in moist and blood-contaminated environments, biocompatibility, adequate mechanical properties, etc. Their principal limitations are long setting time, low radiopacity and difficult handling. New HCSCs-based materials containing additional components (setting modulators, radiopacifying agents, drugs, etc.) have since been introduced and have received a considerable attention from laboratory researchers for their biological and translational characteristics and from clinicians for their innovative properties. HCSCs upregulate the differentiation of osteoblast, fibroblasts, cementoblasts, odontoblasts, pulp cells and many stem cells. They can induce the chemical formation of a calcium phosphate/apatite coating when immersed in biological fluids. These properties have led to a growing series of innovative clinical applications such as root-end filling, pulp capping and scaffolds for pulp regeneration, root canal sealer, etc. The capacity of HCSCs to promote calcium-phosphate deposit suggests their use for dentin remineralization and tissue regeneration. Several in vitro studies, animal tests and clinical studies confirmed their ability to nucleate apatite and remineralize and to induce the formation of (new) mineralized tissues. HCSCs play a critical role in developing a new approach for pulp and bone regeneration, dentin remineralization, and bone/cementum tissue healing. Investigations of the next generation HCSCs for "Regenerative Dentistry" will guide their clinical evolution. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
                Bookmark

                Author and article information

                Journal
                The Open Dentistry Journal
                TODENTJ
                Bentham Science Publishers Ltd.
                1874-2106
                April 19 2021
                April 19 2021
                : 15
                : 1
                : 170-175
                Article
                10.2174/1874210602115010170
                7cff3dbc-29e6-4d17-b493-6224f6f8e1f6
                © 2021

                https://creativecommons.org/licenses/by/4.0/legalcode

                History

                Medicine,Chemistry,Life sciences
                Medicine, Chemistry, Life sciences

                Comments

                Comment on this article