A total of 39 moulders and coremakers exposed to furan resin sand and 27 unexposed local controls were examined by lung-function tests before and after a work shift. In all, 28 of the subjects exposed to furan resin sand and the control group were evaluated by dynamic spirometry and nitrogen washout. The remaining 11 subjects exposed to furan resin sand were studied using both static and dynamic spirometry and the CO single-breath technique. The time-weighted average exposure to furfuryl alcohol was about 7 mg/m3, with peak values exceeding the present Swedish short-term exposure limit (40 mg/m3). The exposure to respirable dust and formaldehyde as time-weighted over the shift was less than 2 mg/m3 and 0.4 mg/m3, respectively, in all groups. During the work shift studied, the 28 exposed subjects had more complaints of airway symptoms than did the controls, showing an average decrease of 0.21 in forced vital capacity but no fall in any other lung-function variable. The remaining 11 exposed subjects demonstrated a post-shift decrease in total lung capacity. The results indicate an acute restrictiveness induced by exposure to furan resin sand, but the underlying mechanism is unclear. Chronic impairment of lung function was not observed.