Inviting an author to review:
Find an author and click ‘Invite to review selected article’ near their name.
Search for authorsSearch for similar articles
3
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      A visible-light-responsive metal–organic framework for highly efficient and selective photocatalytic oxidation of amines and reduction of nitroaromatics

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A novel visible-light-responsive metal–organic framework for highly efficient and selective transformation of amines and nitroaromatics to produce imines and anilines.

          Abstract

          Photocatalysis is a green synthetic method for organics transformation. We present here the synthesis of a novel visible-light-responsive metal–organic framework and its photocatalytic application. The prepared MOF is highly efficient for the self-coupling of primary amines and oxidative dehydrogenation of secondary amines to selectively produce imines assisted by the green and economic oxidant of molecular oxygen. Studies reveal that both energy transfer and electron transfer from the photoexcited MOF to molecular oxygen are important for amine oxidation, where the highly reactive species of superoxide radicals and singlet oxygen together account for the high catalytic performance. The photogenerated electrons of the MOF have also been utilized for the reduction of aromatic nitroarenes. Results show that they are highly selective for the reduction of nitroarenes to produce anilines in the presence of hydrazine hydrate. The work demonstrates the enormous potential of photoactive MOFs for converting organic substrates into valuable chemicals.

          Related collections

          Most cited references55

          • Record: found
          • Abstract: found
          • Article: not found

          A short history of SHELX

          An account is given of the development of the SHELX system of computer programs from SHELX -76 to the present day. In addition to identifying useful innovations that have come into general use through their implementation in SHELX , a critical analysis is presented of the less-successful features, missed opportunities and desirable improvements for future releases of the software. An attempt is made to understand how a program originally designed for photographic intensity data, punched cards and computers over 10000 times slower than an average modern personal computer has managed to survive for so long. SHELXL is the most widely used program for small-molecule refinement and SHELXS and SHELXD are often employed for structure solution despite the availability of objectively superior programs. SHELXL also finds a niche for the refinement of macromolecules against high-resolution or twinned data; SHELXPRO acts as an interface for macromolecular applications. SHELXC , SHELXD and SHELXE are proving useful for the experimental phasing of macromolecules, especially because they are fast and robust and so are often employed in pipelines for high-throughput phasing. This paper could serve as a general literature citation when one or more of the open-source SHELX programs (and the Bruker AXS version SHELXTL ) are employed in the course of a crystal-structure determination.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Generation and Detection of Reactive Oxygen Species in Photocatalysis.

            The detection methods and generation mechanisms of the intrinsic reactive oxygen species (ROS), i.e., superoxide anion radical (•O2-), hydrogen peroxide (H2O2), singlet oxygen (1O2), and hydroxyl radical (•OH) in photocatalysis, were surveyed comprehensively. Consequently, the major photocatalyst used in heterogeneous photocatalytic systems was found to be TiO2. However, besides TiO2 some representative photocatalysts were also involved in the discussion. Among the various issues we focused on the detection methods and generation reactions of ROS in the aqueous suspensions of photocatalysts. On the careful account of the experimental results presented so far, we proposed the following apprehension: adsorbed •OH could be regarded as trapped holes, which are involved in a rapid adsorption-desorption equilibrium at the TiO2-solution interface. Because the equilibrium shifts to the adsorption side, trapped holes must be actually the dominant oxidation species whereas •OH in solution would exert the reactivity mainly for nonadsorbed reactants. The most probable routes of generating intrinsic ROS at the surfaces of two polymorphs of TiO2, anatase and rutile, were discussed along with some plausible rational reaction processes. In addition to the four major ROS, three ROS, that is organic peroxides, ozone, and nitric oxide, which are less common in photocatalysis are also briefly reviewed.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Dynamic imine chemistry.

              Formation of an imine--from an amine and an aldehyde--is a reversible reaction which operates under thermodynamic control such that the formation of kinetically competitive intermediates are, in the fullness of time, replaced by the thermodynamically most stable product(s). For this fundamental reason, the imine bond has emerged as an extraordinarily diverse and useful one in the hands of synthetic chemists. Imine bond formation is one of a handful of reactions which define a discipline known as dynamic covalent chemistry (DCC), which is now employed widely in the construction of exotic molecules and extended structures on account of the inherent 'proof-reading' and 'error-checking' associated with these reversible reactions. While both supramolecular chemistry and DCC operate under the regime of reversibility, DCC has the added advantage of constructing robust molecules on account of the formation of covalent bonds rather than fragile supermolecules resulting from noncovalent bonding interactions. On the other hand, these products tend to require more time to form--sometimes days or even months--but their formation can often be catalysed. In this manner, highly symmetrical molecules and extended structures can be prepared from relatively simple precursors. When DCC is utilised in conjunction with template-directed protocols--which rely on the use of noncovalent bonding interactions between molecular building blocks in order to preorganise them into certain relative geometries as a prelude to the formation of covalent bonds under equilibrium control--an additional level of control of structure and topology arises which offers a disarmingly simple way of constructing mechanically-interlocked molecules, such as rotaxanes, catenanes, Borromean rings, and Solomon knots. This tutorial review focuses on the use of dynamic imine bonds in the construction of compounds and products formed with and without the aid of additional templates. While synthesis under thermodynamic control is giving the field of chemical topology a new lease of life, it is also providing access to an endless array of new materials that are, in many circumstances, simply not accessible using more traditional synthetic methodologies where kinetic control rules the roost. One of the most endearing qualities of chemistry is its ability to reinvent itself in order to create its own object, as Berthelot first pointed out a century and a half ago.
                Bookmark

                Author and article information

                Contributors
                Journal
                JMCAET
                Journal of Materials Chemistry A
                J. Mater. Chem. A
                Royal Society of Chemistry (RSC)
                2050-7488
                2050-7496
                December 3 2019
                2019
                : 7
                : 47
                : 27074-27080
                Affiliations
                [1 ]Provincial Key Laboratory of Advanced Energy Materials
                [2 ]College of Chemistry
                [3 ]Northeast Normal University
                [4 ]Changchun 130024
                [5 ]China
                Article
                10.1039/C9TA10723A
                90fe2339-9416-4d5d-a95c-9606816c5eaf
                © 2019

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article