8
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Enhancement of mechanical strength and in vivo cytocompatibility of porous β-tricalcium phosphate ceramics by gelatin coating

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Background

          In an attempt to prepare scaffolds with porosity and compressive strength as high as possible, we prepared porous β-tricalcium phosphate (TCP) scaffolds and coated them with regenerative medicine-grade gelatin. The effects of the gelatin coating on the compressive strength and in vivo osteoblast compatibility were investigated.

          Methods

          Porous β-TCP scaffolds were prepared and coated with up to 3 mass% gelatin, and then subjected to thermal cross-linking. The gelatin-coated and uncoated scaffolds were then subjected to compressive strength tests and implantation tests into bone defects of Wistar rats.

          Results

          The compressive strength increased by one order of magnitude from 0.45 MPa for uncoated to 5.1 MPa for gelatin-coated scaffolds. The osteoblast density in the internal space of the scaffold increased by 40 % through gelatin coating.

          Conclusions

          Coating porous bone graft materials with gelatin is a promising measure to enhance both mechanical strength and biomedical efficacy at the same time.

          Related collections

          Most cited references34

          • Record: found
          • Abstract: not found
          • Article: not found

          Bioceramics: Past, present and for the future

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair.

            Repair of load-bearing defects resulting from disease or trauma remains a critical barrier for bone tissue engineering. Calcium phosphate (CaP) scaffolds are among the most extensively studied for this application. However, CaPs are reportedly too weak for use in such defects and, therefore, have been limited to non-load-bearing applications. This paper reviews the compression, flexural and tensile properties of CaPs and CaP/polymer composites for applications in bone replacement and repair. This review reveals interesting trends that have not, to our knowledge, previously been reported. Data are classified as bulk, scaffolds, and composites, then organized in order of decreasing strength. This allows for general comparisons of magnitudes of strength both within and across classifications. Bulk and scaffold strength and porosity overlap significantly and scaffold data are comparable to bone both in strength and porosity. Further, for compression, all composite data fall below those of the bulk and most of the scaffold. Another interesting trend revealed is that strength decreases with increasing β-tricalcium phosphate (β-TCP) content for CaP scaffolds and with increasing CaP content for CaP/polymer composites. The real limitation for CaPs appears not to be strength necessarily, but toughness and reliability, which are rarely characterized. We propose that research should focus on novel ways of toughening CaPs and discuss several potential strategies. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Freeze casting of hydroxyapatite scaffolds for bone tissue engineering

                Bookmark

                Author and article information

                Contributors
                unuma@yz.yamagata-u.ac.jp
                Journal
                Int J Implant Dent
                Int J Implant Dent
                International Journal of Implant Dentistry
                Springer Berlin Heidelberg (Berlin/Heidelberg )
                2198-4034
                6 February 2016
                6 February 2016
                December 2016
                : 2
                : 1
                : 4
                Affiliations
                [1 ]Graduate School of Science and Engineering, Yamagata University, 4-3-16 Jonan, Yonezawa, 992-8510 Japan
                [2 ]Tohoku Oral Implant Association, 1-7-42 Hachihon-matsu, Sendai, 980-0001 Japan
                [3 ]Kanagawa Dental College, 82 Inaoka, Yokosuka, 238-8580 Japan
                [4 ]Tokyo Plastic Dental Society, 2-26-2 Oji, Kita-ku, Tokyo, 114-0002 Japan
                [5 ]Jellice Co., Ltd., 4-4-1, Sakae, Tagajo, 985-0833 Japan
                [6 ]Faculty of Engineering, Yamagata University, 4-3-16 Jonan, Yonezawa, 992-8510 Japan
                Article
                37
                10.1186/s40729-016-0037-3
                5005612
                a26109b4-b118-475d-8a35-f8d90c61fed9
                © Furusawa et al. 2016

                Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

                History
                : 22 October 2015
                : 2 February 2016
                Categories
                Research
                Custom metadata
                © The Author(s) 2016

                β-tcp,gelatin,compressive strength,cytocompatibility
                β-tcp, gelatin, compressive strength, cytocompatibility

                Comments

                Comment on this article