7
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Stoichiometric control of live cell mixing to enable fluidically-encoded co-culture models in perfused microbioreactor arrays

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A cell mixer microbioreactor array platform that permits the rapid establishment of perfused cell co-culture models in a high-throughput, programmable fashion.

          In vivo, tissues are maintained and repaired through interactions between the present (different) cell types, which communicate with each other through both the secretion of paracrine factors and direct cell–cell contacts. In order to investigate and better understand this dynamic, complex interplay among diverse cell populations, we must develop new in vitro co-culture strategies that enable us to recapitulate such native tissue complexity. In this work, a microfluidic mixer based on a staggered herringbone design was computationally designed and experimentally validated that features the ability to mix large, non-diffusive particles ( i.e. live cells) in a programmed manner. This is the first time that the herringbone mixer concept has been shown to effectively mix particles of the size range applicable to live cells. The cell mixer allowed for sequentially mixing of two cell types to generate reverse linear concentration co-culture patterns. Once validated, the mixer was integrated into a perfused microbioreactor array as an upstream module to deliver mixed cells to five downstream culture units, each consisting of ten serially-connected circular microculture chambers. This novel cell mixer microbioreactor array (CM-MBA) platform was validated through the establishment of spatio-temporally tunable osteogenic co-culture models, investigating the role of pre-osteoblastic cells (SAOS2) on human mesenchymal stem cells (hMSCs) commitment to an osteogenic endpoint. An increase on expression of alkaline phosphatase in sequential (downstream) chambers, consistent with the initial linear distribution of SAOS2, suggests not only osteoblastic cell-driven hMSCs induction towards the osteogenic phenotype, but also the importance of paracrine signaling. In conclusion, the cell mixer microbioreactor array combines the ability to rapidly establish cell co-culture models in a high-throughput, programmable fashion, with the additional advantage of maintaining cells in culture under perfused medium to explore paracrine factor impacts, representing a promising new tool for directing multi-cellular tissue formation for tissue engineering applications.

          Related collections

          Most cited references40

          • Record: found
          • Abstract: found
          • Article: not found

          Chaotic mixer for microchannels.

          It is difficult to mix solutions in microchannels. Under typical operating conditions, flows in these channels are laminar-the spontaneous fluctuations of velocity that tend to homogenize fluids in turbulent flows are absent, and molecular diffusion across the channels is slow. We present a passive method for mixing streams of steady pressure-driven flows in microchannels at low Reynolds number. Using this method, the length of the channel required for mixing grows only logarithmically with the Péclet number, and hydrodynamic dispersion along the channel is reduced relative to that in a simple, smooth channel. This method uses bas-relief structures on the floor of the channel that are easily fabricated with commonly used methods of planar lithography.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Monolithic microfabricated valves and pumps by multilayer soft lithography.

            Soft lithography is an alternative to silicon-based micromachining that uses replica molding of nontraditional elastomeric materials to fabricate stamps and microfluidic channels. We describe here an extension to the soft lithography paradigm, multilayer soft lithography, with which devices consisting of multiple layers may be fabricated from soft materials. We used this technique to build active microfluidic systems containing on-off valves, switching valves, and pumps entirely out of elastomer. The softness of these materials allows the device areas to be reduced by more than two orders of magnitude compared with silicon-based devices. The other advantages of soft lithography, such as rapid prototyping, ease of fabrication, and biocompatibility, are retained.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Osteogenic differentiation of purified, culture-expanded human mesenchymal stem cells in vitro.

              Human bone marrow contains a population of cells capable of differentiating along multiple mesenchymal cell lineages. Recently, techniques for the purification and culture-expansion of these human marrow-derived Mesenchymal Stem Cells (MSCs) have been developed. The goals of the current study were to establish a reproducible system for the in vitro osteogenic differentiation of human MSCs, and to characterize the effect of changes in the microenvironment upon the process. MSCs derived from 2nd or 3rd passage were cultured for 16 days in various base media containing 1 to 1000 nM dexamethasone (Dex), 0.01 to 4 mM L-ascorbic acid-2-phosphate (AsAP) or 0.25 mM ascorbic acid, and 1 to 10 mM beta-glycerophosphate (beta GP). Optimal osteogenic differentiation, as determined by osteoblastic morphology, expression of alkaline phosphatase (APase), reactivity with anti-osteogenic cell surface monoclonal antibodies, modulation of osteocalcin mRNA production, and the formation of a mineralized extracellular matrix containing hydroxyapatite was achieved with DMEM base medium plus 100 nM Dex, 0.05 mM AsAP, and 10 mM beta GP. The formation of a continuously interconnected network of APase-positive cells and mineralized matrix supports the characterization of this progenitor population as homogeneous. While higher initial seeding densities did not affect cell number of APase activity, significantly more mineral was deposited in these cultures, suggesting that events which occur early in the differentiation process are linked to end-stage phenotypic expression. Furthermore, cultures allowed to concentrate their soluble products in the media produced more mineralized matrix, thereby implying a role for autocrine or paracrine factors synthesized by human MSCs undergoing osteoblastic lineage progression. This culture system is responsive to subtle manipulations including the basal nutrient medium, dose of physiologic supplements, cell seeding density, and volume of tissue culture medium. Cultured human MSCs provide a useful model for evaluating the multiple factors responsible for the step-wise progression of cells from undifferentiated precursors to secretory osteoblasts, and eventually terminally differentiated osteocytes.
                Bookmark

                Author and article information

                Journal
                IBNIEK
                Integrative Biology
                Integr. Biol.
                Royal Society of Chemistry (RSC)
                1757-9694
                1757-9708
                2016
                2016
                : 8
                : 2
                : 194-204
                Article
                10.1039/C5IB00311C
                26337324-455c-4dbf-99aa-e7b1f159cd14
                © 2016
                History

                Comments

                Comment on this article