Inviting an author to review:
Find an author and click ‘Invite to review selected article’ near their name.
Search for authorsSearch for similar articles
11
views
0
recommends
+1 Recommend
1 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Orientación preferencial en nitruros metálicos depositados con el sistema UBM Translated title: Preferential orientation in metal nitride deposited by the UBM system

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          El propósito de este trabajo es el de estudiar la influencia del bombardeo de iones sobre la orientación preferencial (OP) en nitruros metálicos de transición (NMT) producidos utilizando la técnica de sputtering reactivo con magnetrón desbalanceado variable mediante imanes permanentes (UBM). Para ello, se estudiaron recubrimientos de nitruro de titanio (TiN) variando dos parámetros: la razón iones-átomos sobre el sustrato (Ji/Ja) y el flujo de nitrógeno. Las condiciones de depósito fueron: presión de trabajo de 7 mtorr, temperatura del sustrato ~ 380ºC, flujo de nitrógeno 2 y 8,5 sccm, y las potencias de la descarga variaron entre 245 W y 265 W. Los resultados demuestran que la orientación preferencial (111) y la cristalinidad de los recubrimientos producidos depende más del flujo de nitrógeno que del bombardeo iónico. De manera similar, la microdureza medida en películas depositadas sobre sustratos de acero AISI-M2 aumentó desde 1.600 hasta 2.000 HV0.025 al incrementarse el flujo de nitrógeno.

          Translated abstract

          This work was aimed at studying the influence of ion bombardment on the preferred orientation (OP) of transition metal nitrides (TMN) produced by the reactive sputtering technique with a variable unbalanced magnetron through permanent magnets. Titanium nitride (TiN) coatings were thus studied by varying two parameters: ion-atom ratio on the substrate (Ji/Ja) and nitrogen flux. Deposition conditions were as follows: 7 mTorr working pressure, ~ 380ºC substrate temperature, 2 and 8.5 sccm nitrogen flux and 245-265 discharge power. The results showed that preferred orientation (111) and the crystalline behaviour of the produced coatings depended more on nitrogen flux than on ion bombardment. Similarly, micro-hardness measured on films deposited on steel AISI-M2 substrates increased from 1600 to 2000 HV0.025 when nitrogen flux was increased.

          Related collections

          Most cited references2

          • Record: found
          • Abstract: not found
          • Book: not found

          Deformation and Fracture Mechanics of Engineering Materials

            Bookmark
            • Record: found
            • Abstract: not found
            • Book: not found

            Ciencia e Ingeniería de los Materiales

            R DONALD (2003)
              Bookmark

              Author and article information

              Journal
              iei
              Ingeniería e Investigación
              Ing. Investig.
              Facultad de Ingeniería, Universidad Nacional de Colombia. (Bogotá, Distrito Capital, Colombia )
              0120-5609
              April 2010
              : 30
              : 1
              : 125-129
              Affiliations
              [02] orgnameUniversidad Autónoma de México orgdiv1Instituto de investigaciones en Materiales México
              [01] Bogotá orgnameUniversidad Nacional de Colombia, Bogotá orgdiv1Facultad de Ingeniería orgdiv2Departamento de Ingeniería Mecánica y Mecatrónica, jjolaya@ 123456unal.edu.co.
              Article
              S0120-56092010000100021 S0120-5609(10)03000121
              a2a655ec-b6c3-481d-8fd2-5dee2663eda9

              This work is licensed under a Creative Commons Attribution 4.0 International License.

              History
              : 13 March 2010
              : 16 February 2009
              Page count
              Figures: 0, Tables: 0, Equations: 0, References: 25, Pages: 5
              Product

              SciELO Colombia

              Self URI: Texto completo solamente en formato PDF (ES)
              Categories
              Artículos de nuevo conocimiento

              nitruros metálicos,reactive sputtering,UBM,unbalanced magnetron,metal nitride,sputtering reactivo,magnetrón desbalanceado

              Comments

              Comment on this article