7
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Lead(ii) uptake by aluminium based magnetic framework composites (MFCs) in water

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          MIL-53(Al) based magnetic framework composites with iron oxide nanoparticles exhibit high uptake of lead( ii) from aqueous solution.

          Abstract

          The recent combination of Metal-Organic Frameworks (MOFs) and magnetic nanoparticles has shown their potential as a composite material in practical applications including drug delivery, catalysis and pollutant sequestration. Here, we report for the first time the preparation of a robust magnetic nanocomposite material based on an aluminium MOF (MIL-53) and iron oxide nanoparticles for the uptake of lead( ii) ions. Different aminofunctionalized MIL-53 MOFs were prepared by increasing the 2-aminoterephthalic/terephthalic acid ratio. The composite materials were tested to determine the sequestration capability of heavy metals from various solvents (methanol, DMSO and water), pH (2, 7, 12) and a range of Pb( ii) concentrations (10–8000 ppm). The magnetic composite based on MIL-53 showed remarkable capacity to sequester Pb( ii) ions from water (up to 492.4 mg g −1 of composite), the highest recorded for a MOF sorbent system to date. While the MOF played a crucial role in the efficient heavy metal uptake, the magnetic nanoparticles allowed the prompt collection of the sorbent from solution. The triggered release of Pb( ii) was investigated using an alternating magnetic field. The exceptional adsorption capacity and the response to the magnetic field make this class of innovative functional material a promising candidate for environmental remediation technologies.

          Related collections

          Most cited references74

          • Record: found
          • Abstract: found
          • Article: not found

          A rationale for the large breathing of the porous aluminum terephthalate (MIL-53) upon hydration.

          Aluminum 1,4-benzenedicarboxylate Al(OH)[O(2)C-C(6)H(4)-CO(2)]. [HO(2)C-C(6)H(4)-CO(2)H](0.70) or MIL-53 as (Al) has been hydrothermally synthesized by heating a mixture of aluminum nitrate, 1,4-benzenedicarboxylic acid, and water, for three days at 220 degrees C. Its 3 D framework is built up of infinite trans chains of corner-sharing AlO(4)(OH)(2) octahedra. The chains are interconnected by the 1,4-benzenedicarboxylate groups, creating 1 D rhombic-shaped tunnels. Disordered 1,4-benzenedicarboxylic acid molecules are trapped inside these tunnels. Their evacuation upon heating, between 275 and 420 degrees C, leads to a nanoporous open-framework (MIL-53 ht (Al) or Al(OH)[O(2)C-C(6)H(4)-CO(2)]) with empty pores of diameter 8.5 A. This solid exhibits a Langmuir surface area of 1590(1) m(2)g(-1) together with a remarkable thermal stability, since it starts to decompose only at 500 degrees C. At room temperature, the solid reversibly absorbs water in its tunnels, causing a very large breathing effect and shrinkage of the pores. Analysis of the hydration process by solid-state NMR ((1)H, (13)C, (27)Al) has clearly indicated that the trapped water molecules interact with the carboxylate groups through hydrogen bonds, but do not affect the hydroxyl species bridging the aluminum atoms. The hydrogen bonds between water and the oxygen atoms of the framework are responsible for the contraction of the rhombic channels. The structures of the three forms have been determined by means of powder X-ray diffraction analysis. Crystal data for MIL-53 as (Al) are as follows: orthorhombic system, Pnma (no. 62), a = 17.129(2), b = 6.628(1), c = 12.182(1) A; for MIL-53 ht (Al), orthorhombic system, Imma (no. 74), a = 6.608(1), b = 16.675(3), c = 12.813(2) A; for MIL-53 lt (Al), monoclinic system, Cc (no. 9), a = 19.513(2), b = 7.612(1), c = 6.576(1) A, beta = 104.24(1) degrees.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            A facile synthesis of UiO-66, UiO-67 and their derivatives.

            A scalable, reproducible method of synthesizing UiO-66- and UiO-67-type MOFs, entailing the addition of HCl to the reaction mixture, has been investigated. The new protocol requires a fraction of the time of previously reported procedures, yields exceptional porosities, and works with a range of linkers.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              MOF-based electronic and opto-electronic devices.

              Metal-organic frameworks (MOFs) are a class of hybrid materials with unique optical and electronic properties arising from rational self-assembly of the organic linkers and metal ions/clusters, yielding myriads of possible structural motifs. The combination of order and chemical tunability, coupled with good environmental stability of MOFs, are prompting many research groups to explore the possibility of incorporating these materials as active components in devices such as solar cells, photodetectors, radiation detectors, and chemical sensors. Although this field is only in its incipiency, many new fundamental insights relevant to integrating MOFs with such devices have already been gained. In this review, we focus our attention on the basic requirements and structural elements needed to fabricate MOF-based devices and summarize the current state of MOF research in the area of electronic, opto-electronic and sensor devices. We summarize various approaches to designing active MOFs, creation of hybrid material systems combining MOFs with other materials, and assembly and integration of MOFs with device hardware. Critical directions of future research are identified, with emphasis on achieving the desired MOF functionality in a device and establishing the structure-property relationships to identify and rationalize the factors that impact device performance.
                Bookmark

                Author and article information

                Journal
                JMCAET
                Journal of Materials Chemistry A
                J. Mater. Chem. A
                Royal Society of Chemistry (RSC)
                2050-7488
                2050-7496
                2015
                2015
                : 3
                : 39
                : 19822-19831
                Article
                10.1039/C5TA04154F
                bb43bfe3-1257-418a-9cf9-6c0d921a5b06
                © 2015
                History

                Comments

                Comment on this article