0
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Zero modes activation to reconcile floppiness, rigidity, and multistability into an all-in-one class of reprogrammable metamaterials

      research-article
      ,
      Nature Communications
      Nature Publishing Group UK
      Mechanical engineering, Mechanical properties

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Existing mechanical metamaterials are typically designed to either withstand loads as a stiff structure, shape morph as a floppy mechanism, or trap energy as a multistable matter, distinct behaviours that correspond to three primary classes of macroscopic solids. Their stiffness and stability are sealed permanently into their architecture, mostly remaining immutable post-fabrication due to the invariance of zero modes. Here, we introduce an all-in-one reprogrammable class of Kagome metamaterials that enable the in-situ reprogramming of zero modes to access the apparently conflicting properties of all classes. Through the selective activation of metahinges via self-contact, their architecture can be switched to acquire on-demand rigidity, floppiness, or global multistability, bridging the seemingly uncrossable gap between structures, mechanisms, and multistable matters. We showcase the versatile generalizations of the metahinge and remarkable reprogrammability of zero modes for a range of properties including stiffness, mechanical signal guiding, buckling modes, phonon spectra, and auxeticity, opening a plethora of opportunities for all-in-one materials and devices.

          Abstract

          Floppiness, rigidity, and multi-stability often represent inherently contradictory macroscopic properties in solids. Here, authors introduce an all-in-one metamaterial that capitalizes on local state transitions to harmonize these divergent properties within a single transformable architecture.

          Related collections

          Most cited references49

          • Record: found
          • Abstract: not found
          • Article: not found

          Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Ultralight, ultrastiff mechanical metamaterials.

            The mechanical properties of ordinary materials degrade substantially with reduced density because their structural elements bend under applied load. We report a class of microarchitected materials that maintain a nearly constant stiffness per unit mass density, even at ultralow density. This performance derives from a network of nearly isotropic microscale unit cells with high structural connectivity and nanoscale features, whose structural members are designed to carry loads in tension or compression. Production of these microlattices, with polymers, metals, or ceramics as constituent materials, is made possible by projection microstereolithography (an additive micromanufacturing technique) combined with nanoscale coating and postprocessing. We found that these materials exhibit ultrastiff properties across more than three orders of magnitude in density, regardless of the constituent material.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Flexible mechanical metamaterials

                Bookmark

                Author and article information

                Contributors
                damiano.pasini@mcgill.ca
                Journal
                Nat Commun
                Nat Commun
                Nature Communications
                Nature Publishing Group UK (London )
                2041-1723
                10 April 2024
                10 April 2024
                2024
                : 15
                : 3087
                Affiliations
                Department of Mechanical Engineering, McGill University, ( https://ror.org/01pxwe438) Montreal, Canada
                Author information
                http://orcid.org/0000-0002-3021-7118
                Article
                47180
                10.1038/s41467-024-47180-0
                11006655
                38600069
                e1045264-3e20-4e19-9a4e-e58387c10fc1
                © The Author(s) 2024

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 8 January 2024
                : 15 March 2024
                Funding
                Funded by: FundRef 501100001804, Canada Research Chairs (Chaires de recherche du Canada);
                Funded by: Natural Sciences and Engineering Research Council of Canada
                Funded by: FundRef 501100004543, China Scholarship Council (CSC);
                Award ID: 202006280037
                Categories
                Article
                Custom metadata
                © Springer Nature Limited 2024

                Uncategorized
                mechanical engineering,mechanical properties
                Uncategorized
                mechanical engineering, mechanical properties

                Comments

                Comment on this article